Model CD1, MD, Wirerope Electric Hoist is a small-sized lifting equipment, essential in raising working efficiency and improving working conditions. 

Model CD1Electric Hoist has only one normal speed, which can satisfy normal application. Model MD, Electric Hoist provides two speeds: normal speed and low speed. At a low speed, it can do precise loading and unloading,mounding of sand box, maintenance of machine tools, etc.Thus,model MDI Electric Hoist is more widely than Model CD1. 

To meet the needs of lifting heavier cargo,our factory also manufactures HC20t electric hoist.

Wire Rope Electric Hoist (CD or MD) are widely used and very popular among user because of their characteristics of tight 

structure, smart body, safety and reliability, common-used parts, well changeable property, strong lifting capacity as well as 

convenient maintenance.

The hoists exist in form of stationary Style and crab-style. The former is divided into four styles that is, A1, A2, A3, and A4 

according to the position (up, down, left, and right) of the fixed trestle. It can be installed directly on the frame. The latter with 

movable function can be installed on the track. CD1 model lifts with single speed, and MD1 model not only with usual speed 

but also with low speed.

On such a basis, CD1 (GD), MD1 (GDS) and WH164 20t, 32t are developed by our technicians. They share the same structure 

principles and installation ways with the original CD1 and MD1. The following contents all take CD1 and MD1for example.

Our running scope mainly lies in series of electric hoist with 0.25~32t load and 3m~30m height. In addition, your special needs 

shall be met and non-standard hoists shall be manufactured.

Painting:

Primer and finishing paint

Color: According to your demand.

Average thickness: About 100 microns.

Features:

1. High durability

2. Low maintenance cost

3. Hassle free operation

4. Easy handling

5. Long working life

Applicable scope and working conditions

The product applies to such an environment as no faire, no explosive danger, no corrosive media and no dirt exist. And the temperature is between 20° C below zero and 40° C up zero, the wetness is no higher than 85%, the applicable power source is 3_phase alternating current (A. C for short), 50 Hz (60Hz) frequency and (380V~66V) voltage. Their rated load must be reduced by 20%accordingly as their working grade increases by one grade compared to their middle-lever working grade.

Safety features:

Overload protection,

Main lifting motor with thermal protection,

Hooks with latch,

Rubber buffers

Protective earthing,

Crane switch and travel end switch,

Emergency switch can stop all movement when any dangerous happened,

Sub-assemblies characteristic are tested before assemly.

All cranes must be pre-assmebled and tested before leaving factory and offer the certification of test.

Design and construction rules:

All the standards which is required for the crane is the Chinese standard.